--- title: Reading Your Oil Cap: 0W-20, 5W-30 and the API Marks url: https://xpressoilandlube.com/guides/reading-your-oil-cap/ business: Xpress Oil & Lube (Xpress Oil & Lube Center) shops: Reno Northwest: 6100 Mae Anne Ave, Reno, NV 89523, (775) 787-1000, Mon-Fri 8 am-5 pm, Sat 8 am-4 pm, Sun closed; Reno South: 4993 Longley Ln, Reno, NV 89502, (775) 828-6996, Mon-Fri 8 am-5 pm, Sat 8 am-3 pm, Sun closed; Carson City: 1861 E College Pkwy, Carson City, NV 89706, (775) 883-5823, Mon-Fri 8 am-5 pm, Sat 8 am-4 pm, Sun closed; Gardnerville: 1293 US Hwy 395 N, Gardnerville, NV 89410, (775) 301-5912, Mon-Fri 9 am-5 pm, Sat 9 am-3 pm, Sun closed type: Drive-in oil change and vehicle maintenance, no appointment needed, since 1983 --- Today's coupons - $10 off full-service oil change - $5 off smog check - $25 off transmission fluid service [See all coupons](https://xpressoilandlube.com/coupons/) - [Home](https://xpressoilandlube.com/) - [Guides](https://xpressoilandlube.com/guides/) - Reading the oil cap: viscosity grades like 0W-20 and 5W-30 # Reading Your Oil Cap: What 0W-20, 5W-30 and the API Marks Mean The grade on your oil cap, such as 0W-20 or 5W-30, is the SAE viscosity your engine was designed for: the number before the W is the cold-cranking grade and the number after it is the viscosity at operating temperature. The cap and the manual together tell you the grade and the API or maker specification, and both must match the oil that goes in. ★★★★★ 4.7 stars from 952 Google reviews Most engines built in the last fifteen years print the oil grade right on the filler cap, and that short code carries more information than it looks. It tells you how the oil flows on a 15-degree morning in the Carson Valley, how it holds up on a 100-degree climb out of Reno, and which oils on the shelf are allowed. This guide decodes the grade under the SAE J300 standard, explains the API marks and the maker standards you will find in the manual, and describes why reading the cap is the first thing we do in the bay. ## At a glance - 0W-20: 0W is the winter grade (cold flow), 20 is the operating-temperature viscosity, both defined by SAE J300. - A lower W number flows better on a cold start; the second number is what the engine's bearings and oil pump were designed for. - The API Donut shows the service category (SP for current gasoline engines) and grade; the Starburst shows the oil meets the current ILSAC standard. - Many makers add their own standard; the manual names it, and the oil must carry it. ## The grade: what the two numbers mean SAE J300 is the standard that classifies engine oils by viscosity, which is a measure of how thick the oil is and how it resists flow. A multigrade oil like 5W-30 has two ratings. The number with the W, for winter, describes how the oil behaves cold: how easily it can be pumped and how much drag it puts on the starter at low temperatures. A 0W oil flows at lower temperatures than a 5W, which flows at lower temperatures than a 10W. The second number describes the oil's viscosity at the engine's operating temperature, around 212 F. A 30 is thicker than a 20 at that temperature, and a 40 thicker still. Both numbers matter here. On a January morning in Minden, where 75 nights a year drop to 20 F or below (NOAA 1991-2020), the W grade decides how fast oil reaches the camshafts. On an August afternoon on the Mount Rose Highway, the second number decides how thick the film is between the crankshaft and its bearings. Your engine's oil pump, clearances and variable valve timing were designed around one specific grade, which is why the cap names it. ## Why thin grades took over Twenty years ago 5W-30 and 10W-30 were the common grades. Today 0W-20 is the most common, with 0W-16 and even 0W-8 appearing on some engines. Thinner oil means less drag, which means better fuel economy, and engines have been designed with tighter clearances and better oil control to run on it. That is also why running a thicker oil than the cap specifies in a modern engine is a mistake: the variable valve timing and the oil passages were sized for the thin grade, and a heavier oil can slow those systems and trip a code. Pick the grade the cap and manual name, and choose among the conventional, blend and full synthetic oils that carry it; the [synthetic versus conventional guide](https://xpressoilandlube.com/guides/synthetic-vs-conventional-oil/) covers that choice. ## The API marks on the bottle The American Petroleum Institute runs the Engine Oil Licensing and Certification System that puts two marks on a bottle. The API Service Symbol, called the Donut, is a ring that names the service category in the top half, the viscosity grade in the center and, where it applies, Resource Conserving in the bottom. SP is the current category for gasoline engines and is backward-compatible with earlier ones like SN. Diesel engines use the C categories such as CK-4. The API Certification Mark, the Starburst, means the oil meets the current ILSAC standard for gasoline engines that most automakers specify, and a newer Shield mark covers the 0W-16 grade. The API Motor Oil Guide explains all three. If your manual asks for API SP and SAE 0W-20, the bottle should show both. ## Maker standards: the extra line in the manual Many manufacturers publish their own oil approvals on top of the API category: GM's dexos, Ford's WSS specifications, and the long lists from the German makes. Where the manual names one, the oil has to carry that approval too, because the maker tested for things the API category does not cover, such as turbocharger deposit control or compatibility with its emissions equipment. The cap usually shows only the grade; the standard is in the manual's capacities and specifications page, and it is part of what we look up by year, make and engine before any fill. ## Why we read the cap first in the bay The first thing a technician does when your car pulls into Mae Anne Avenue, Longley Lane, College Parkway or our Gardnerville service center is open the hood, read the cap, and pull the specification for your engine. The cap and the data must agree; if a previous owner put a 5W-30 cap on a 0W-20 engine, the data wins and we tell you. We then tell you which oils on hand meet the grade, the API category and any maker standard, and you pick. The grade and category go on the invoice and into [My Garage](https://xpressoilandlube.com/garage/). If the cap is blank or worn, the manual's specification page or the maker's service data is where we look. We will not guess a grade from what was in the engine before. Drive in with your manual if you have questions about the standard it names, and we will go through it with you while the oil drains. ## Quick decode | On the cap | What it means | |---|---| | 0W-20 | Flows at the lowest cold temperatures in the common grades; 20 viscosity hot. Most current Toyota, Honda, Subaru and many others. | | 5W-20 | Slightly thicker cold than 0W; 20 hot. Common on older Ford and Honda engines. | | 5W-30 | Common on older domestic and European engines; 30 hot. | | 0W-40 or 5W-40 | Thicker hot grade for many European and some performance engines. | | 15W-40 or 5W-40 CK-4 | Diesel grades; the C category is the diesel service category. | ### Sources - [saemobilus.sae.org/content/J300_202405/](https://saemobilus.sae.org/content/J300_202405/) (SAE J300 Engine Oil Viscosity Classification, revised May 2024, read 10/15/26) - [api.org/products-and-services/engine-oil/documents/motor-oil-guide](https://www.api.org/products-and-services/engine-oil/documents/motor-oil-guide) (American Petroleum Institute Motor Oil Guide: the Donut, Starburst and Shield marks and service categories, read 10/15/26) - [ncei.noaa.gov/products/land-based-station/us-climate-normals](https://www.ncei.noaa.gov/products/land-based-station/us-climate-normals) (NOAA NCEI 1991-2020 normals, Minden station cold nights, read 10/15/26) ### Your service center: Reno Northwest - Call [(775) 787-1000](tel:+17757871000) Mon-Fri 8 am-5 pm, Sat 8 am-4 pm, Sun closed - Address 6100 Mae Anne Ave, Reno, NV 89523 [Directions](https://www.google.com/maps/dir/?api=1&destination=6100+Mae+Anne+Ave%2C+Reno%2C+NV+89523&destination_place_id=ChIJ3dFA7yBEmYARYg1CtQTi_Bk) Drive in. No appointment. Drive out. Locally owned in Northern Nevada since 1983. No appointment, no pressure: we tell you what the inspection found and you decide. [About us](https://xpressoilandlube.com/about/) ### Keep reading - [Synthetic vs conventional oil: which one your car needs](https://xpressoilandlube.com/guides/synthetic-vs-conventional-oil/) - [Full-service oil change](https://xpressoilandlube.com/services/oil-change/) - [Glossary](https://xpressoilandlube.com/glossary/) - [Toyota oil change](https://xpressoilandlube.com/vehicles/toyota/) - [Subaru oil change](https://xpressoilandlube.com/vehicles/subaru/) - [Diesel oil change](https://xpressoilandlube.com/services/oil-change/diesel/) ## Questions people ask Still have a question? Call your service center or drive in; there is no appointment to make. ### Can I use 5W-30 if my cap says 0W-20? Use what the cap and manual say. The engine's clearances and valve timing were designed for the thin grade, and a thicker oil can affect both. ### What does the W stand for? Winter. It marks the cold-temperature grade under SAE J300. It does not stand for weight. ### Does API SP replace SN? SP is the current gasoline category and is backward-compatible with SN and earlier. An SP oil can be used where SN was specified. ### My manual names dexos. Does that matter? Yes. It is GM's own approval, and the oil must carry the dexos mark in addition to the grade. ### Do you check the cap on every car? Yes. Reading the cap and pulling the specification for your engine is the first step of every oil change at our service centers.